OTHG MX LACR South National

Last weekend was the OTHG MX LACR South National. Racers from all over California and surrounding areas came out to battle it out for two days of racing. All the racers rode at least 2 motos per day and a lowest overall score for the weekend would decide the overall winners. With summer coming to an end there were cooler temps in the morning and evenings.  Arriving the Friday to a fully packed track with many racers camping out. The LACR track crew did a great job to prepare the track. The course is about 1.5 miles long and nets around 2 minute lap times.

The pits filled up fast on Friday.

The N2Dirt riders showed excellent speed. With onsite suspension support the riders were able to get bikes checked out on dialed in before the races. The track got rough super fast with a lot of racers trying to set the pace to win. Our crew was busy setting sag and consulting riders on line selections and  racing strategy.

LIT Pro with onsite demos.

We were able to connect with the LITPro team to analyze on track data to improve lap times. Litpro is high definition GPS over-laid  on an over head photo of the most current track design. The data is very helpful to understand where you can make up time on the track. The guys were able to explain the applications power in racing. Adding sensors to test suspension speed and travel is the next step in the game for us. Real time data of what the suspension is doing to aid in tuning. This will help eliminate some of the guess work of getting good settings. Along with these options the Litpro shows what sort of G forces the rider is experiencing. There is a direct correlation of G force and lap times. We look forward to working with Litpro in the future.

Several N2dirt riders won throughout the weekend. Here’s a list of the winners:

  • Scott Sligar 58 Expert
  • Kevin Barda 52 Master
  • George Andrews 52 Intermediate
  • Sean Collier 30 Master
  • Brian Bolding 38 Master

Click to view results.

Click to view lap times.

othgmx.com

 




KTM WP XPLOR Fork and Shock Review

With the new bikes hitting the showroom floor we have had a full year to put the new KTM WP XPLR suspension through it’s paces. As the budget for suspension tightened up it is clear that we will see some shortcomings from the performance and modifications will be necessary for the serious rider or racer. Some issues to address will be the effectiveness of the fork compression adjustment and the long term durability of the shock.

WP XPLOR 48 Fork

With the 4CS a thing of the past we are on to a redesigned open chamber fork. Keeping with the single adjuster theme WP adjusts the XPLOR on the top with rebound and compression adjuster. Some models come with external pre-load adjusters. We have found the compression adjuster to make very little difference through out the range and the fork lacks sufficient dampening control for any aggressive riding. With most of the damping control isolated to the rebound side the compression side has a plunger style adjuster. This plunger valve body has an adjustable port area and an open cartridge via 4 holes just below the cartridge rod bushing. The plunger can never be totally closed off or else the fork would hydraulically lock out. This is a simple and not very effective design. The more parts they can leave out the lower the budget can be. Essentially just to get the bike off the showroom floor.

Solutions

Total cartridge replacement. With high quality fork tubes replacing the lacking internals is a viable option. MX-TECH has designed and tuned a really nice complete cartridge fork that comes with necessary springs. LINK

Dal Soggio Sphere is another cartridge kit to replace the internals with high quality parts. Springs are additional. Some modifications are necessary for installation and it is recommended to have a professional install them.

DS also supplies an upgraded kit to add the missing parts called the XP-ONE.

Focused Fork revalve is available but added parts are recommended to gain added compression adjust-ability. Base valves and a 2nd mid-valve.

WP XPLOR SHOCK 

WP goes for a lighter and less expensive design for the shock. Down to 46mm this shock is prone to overheating and fading with less shock fluid to control damping. The shock has a similar feel to the PDS as it has a tendency to have a fast rebound and kick up in consecutive bumps. The best solution for the shock is to revalve to correct the high speed damping for square edge bumps. Increased capacity by adding a TANK from MX-TECH. This will help keep the shock cool by lowering friction and adds overall oil capacity. The tank replaces the OEM plastic piston with a coated aluminium unit.

The second piston design has been simplified. Instead of the bottoming needle there is now a Ohlins or MX-TECH style piston and cylinder to aid in damping for the last part of the stroke. Along with the new piston there is a check valve.

If you have any questions or need to set up an appointment feel free to call us 661 252-0269.




Results are in…Race around the Lake, OTHG, Glen Helen REM

Two weeks ago the N2Dirt crew prepped Sean Collier’s KTM 450SXF for the Race around the Lake GP. The track consisted of many different types of terrain to race on. From beach sand to concrete pathways and everything between. Getting a bike setup to go fast here is tricky to say the least. After spending all morning at LACR for the OTHG 9-11 memorial race, lead mechanic Brian Bolding hustled to Castaic lake for Pro race which was  the last race of the day. Having raced the GP the day before Brian was able to make setting changes to Sean’s KTM to go from a MX setup to more of an offroad setting. The fast course was rough, hard, and dusty through most of the course. Sag adjustment, air pressure settings with the A48R, and clickers were all dialed in to suit the course.

Brian making last minute preparations on Sean’s KTM 450SXF.

Sean pulled an early lead over teammate Darryn Durham as the race started. After a few laps the lead was about 15 seconds as both riders found their pace over the rest of the pack. Sean’s bike was custom fitted with triple clamps and  a Scott’s steering stabilizer by LuxonMX to keep Sean going fast and in control.  As the rider’s searched for smooth lines the gap tighten. Darryn was pushing the pace and made up time on Sean. With super dusty and silty conditions making a move would be difficult as it was hard to see.

One of the less dusty spots on the course with the lake in the background.

As the race came to an end Sean and Darryn had left the rest of the field. Darryn made a late charge for the win but with out a whole lot of track left or room to pass Sean was able to cruise to victory.

Brian Medieros ripping the REM track.

Glen Helen REM Saturday MX returned from a month long summer break. With new bikes out the pits were super busy. The MXA crew switched brands all day long to get a feel for the new models. N2Dirt rider Tommy Wilcox came out and had an impressive day aboard his KTM with Brian wrenching for him. He ended the day with 4 moto wins including an overall even though he suffered a front flat.

Tommy making waves.

Jody Weisel of MXA testing out the N2Dirt suspension. These forks were fitted with the Sphere cartridges by Dal Soggio. He was impressed by the feel and it was a huge improvement over the stock fork.

 

Jon Ortner had a good day going 1-1 in the 50 elite class. The second moto he raced the KTM450sxf fitted with the Sphere system. It was a photo finished as the bike had a fuel leak at the end of the race from contact with another rider.

A heart felt tribute to an amazing man Tom White. The REM crew got together to give him this photo and banner. Tom is on the white flag lap in his life. As racers we all are like family to each other. Tom has been instrumental in so many ways to us and has made this world so much better. We honor and love the man you are. REM 




Mammoth Motocross Barda VS. Davis

For 50 years Mammoth transforms into a motocross town for 2 weeks every summer. With record snowfall this season getting the track dialed in for racing proved to be no simple task with over 2 million gallons of water in the parking lot just 2 weeks prior to the race.  The track crew did a great job in preparing for the races and everything was top notch.

The N2dirt crew was busy prepping bikes for Mammoth. Kevin Barda #852 joined the team this year. N2dirt custom tuned the suspension on his RMZ450 with a pro motocross setup. Kevin competed in the 40A and 50A classes. Riding in the higher altitude the bikes can be under powered. Kevin opted to have the N2Dirt team build the engine to increase the torque and horsepower though out the range. The result of a strong engine and good shock settings netted Kevin multiple holeshots. Kevin rode great and took the overall on Saturday in the 50A class after trading moto wins with another stellar N2Dirt rider Eddie Davis #155.

Barda kept the N2Dirt lead mechanic Brian Bolding busy both days as he raced two classes. His best overall finish in the 40A class was a 4th. Ed Davis would take the overall on Sunday by beating Barda in both motos by a near margin. Both N2dirt riders were able to start out in front of DR D,Doug Dubach in the 2nd moto of day 2. They were able to hold him off but not long. Dubach made a mistake and came away with a 3rd in the 2nd moto. This resulted in Davis 1st and Barda 2nd. Great results for 2 great riders on good equipment.

N2Dirt returned to mammoth for the Pro weekend with Thomas Wilcox racing the 250 class. Tommy was in a mad rush to get his KTM250SXF ready to get to the line the week leading up to the race. Faced with a broken transmission from a chain strike Tommy employed us to do a complete case swap and trans rebuild in 2 days. Faced with the challenge the lead mechanic was back at it and made it happen. Tommy showed up to the line and pulled a huge hole-shot with his freshly built motor and N2Dirt suspension hooking it up. Out of the 160 competitors that showed up in his class he walked away with a very respectable pair of 12th places after a great effort.




2015.5+ KTM/Husqvarna linkage Specifications

Designed in collaboration with Luxon MX, N2dirt Suspension has created a high performance linkage to address the shortcomings of the 2015.5+ KTM/Husqvarna rear suspension.

https://www.n2dirt.net/product/wp-linkage-knuckle/

These improvements include improved handling, wheel travel, and bottoming control.

The image below has wheel rate graphs vs stock positions to illustrate how our linkage can accomplish this by changing the rear suspension movement. The addition of this linkage is the first modification before any spring change or shim setting as they will need to be matched.

Click here to learn more

 

See the chart below to choose the proper spring rate for your bike.

n2dspring chart




MXA’s notice to KTM 250/350SXF owners

MOTOCROSS SCUTTLEBUTT, INSIDER INFO & MUNDANE STUFF

Last weekend at the REM races, N2-Dirt’s Brian Bolding found five KTM 350SXF’s with loose crank nuts on the clutch side. This nut cannot fall off the end of the crank, but it can spin against the case, wear enough aluminum away to clog the oil lines and even allows the snap ring and crank seal to walk out. We recommend that you check the nut on the end of the your KTM 250 or 350 crank — it does require draining the water and removing the impeller to get to. The first signs are some strange engine noises, followed by the cam chain tensioner’s hydraulic lines getting clogged and eventually a ton of aluminum in your oil filter (you may have to cut the oil filter open to see it). We talked to KTM and expect a KTM dealer bulletin to be sent out. This only affects KTM 250SXF and 350SXF engines and not the 450SXF.

350SXF Owners! We have found an issue on multiple new bikes that will cause serious damage to the motor and/or make you crash. This fix requires a few parts and is inexpensive but needs to be done ASAP.

A post shared by N2Dirt Suspension (@n2_dirt) on

 




AER Air Piston Update

The 17.5 AER Fork received an update to the Air piston. We have found these to feel better with less friction after they are torn down and greased. The OEM grease is not sufficient and is grabby in the beginning of the range. We are updating all the older forks with this piston and the better grease. This is a great fork and a good design but needs some attention. Send us your fork and we can get you updated with the new piston and re-valve at the same time.

Read more here about the works mid-valve.

 

 




MX-Tech High performance Cartridge Kits 4CS, Xplr and PSF2

We take a look inside of MX-Tech’s newest drop in cartridge kits for the 4CS, Xplr, and KYB PSF2.




4 Lost Days in Utah

N2dirt rider Andrew Dawson put together this great video of his 800 mile dual sport ride in South Eastern Utah. Andrew is a sound engineer and is very talented. The music and video are masterfully mixed together to give you the feel of their experience. The ride was on his KTM450EXC that we built.

4 Lost Days in Utah from Fpv Dee on Vimeo.




A48R with Shock Huck Valve Expert setup

We now have a dozens of rides on the latest version of the MX-Tech shock huck valve with AER fork on our 2016 KTM450SXF.

This mod is intended on running it in conjunction with the PC complete linkage, TANK, Triple Adjuster, and 5.2kg/mm spring. 195lbs Vet expert moto/gp settings.

First impression is huge improvement of bottoming resistance over revalved shock. I used to have a good amount of rub marks on the fender after a long moto and now I am just noticing the dirt is just getting rubbed off and no tire mark. The presents of the bottoming system is there and you can feel it but as long as your compression clicker isn’t backed out to far you don’t feel it come on too much when it’s low in the stroke.

Watching the action of the rear end of the bike looks so much different than a stock setup bike. Much more controlled motion and planted feel. Traction is greatly improved as you don’t need a really stiff low speed compression stack to compensate for bottoming resistance.

With the triple adjuster you can really dial in the low speed rebound to keep the back tire biting when unloaded on entry of a low speed roller into a turn.

Seat bounce any jump face out of a turn with confidence that you won’t blow through the entire stroke instantly.

The balance of the bike has improved to match the bottoming resistance of the AER Fork. While we are happy with the results so far we aren’t done tuning yet and will continue with races as weather is permiting. Stay tuned!